William Wynne

"The Corvair Authority"
5000-18 HWY 17 #247
Orange Park, FL 32003 USA



Corvair Motor Mount for Pietenpol Air Camper

Above, three Pietenpol Air Camper Corvair Mounts. You can read about these at our www.FlyCorvair.net March 25, 1013 page as well as at our November 12, 2012 www.FlyCorvair.net page.

In the 1990s, I built two Air Campers and flew one for a number of years. During this time, I made three different Motor Mounts for the aircraft to test CG and thrust lines. The Motor Mounts we build today are based on this information, 30 additional Mounts I've built since then, and our in-depth weight and balance tests on 30 Pietenpols completed in 2010-2012. These Mounts are designed to raise the thrust line slightly and have the proper length to work with larger pilots and stay within the design's 15-20" CG range.

We hand build each Mount in our own shop. They are completely finished welded, available powdercoated and ready to mount on the airplane. They're Tig welded airtight and do not require any further internal corrosion protection. They're made of 4130 aircraft tubing, and have been tested to G limits in excess of the airframe's rating.

Please print, complete and return a Liability Statement with all orders. These are available for printing at the Liability Statement Page.

Thank you for your order. Your support makes possible further research and development on the Corvair.

BACK


HOME  Now At The Hangar  Zenair 601  Daily Q&A  Flying Corvair Planes!  News  Who Is William Wynne  Conversion Manual  Manual Photos  Online Catalog  Maximum Horsepower  All About Corvairs  Corvair History  Engine Specs  Sonex Installation  RV Application  Why Fly Corvair?  FAQs  Technical Support  Links  Liability Statement  Carb Ice 

Copyright 2018 William Wynne Web Design by Aviatrix