Brodhead, Oshkosh and Beyond 2013
Here is the photo report from our 3,500 mile 20-state 21-day road trip that encompassed Brodhead, Oshkosh, and House Calls.
As always, there are many photos of people because homebuilt aircraft do not spontaneously generate themselves. They are made
of the persistence and craftsmanship of individuals who have chosen their path, not of the least resistance, but of the most
challenging and rewarding path.
Brodhead is the annual gathering of Pietenpols in Southern Wisconsin. This year is about the 20th trip we've made
Randy Bush flew in for the third year in a row in his Piet, above, named Miss Le'Bec
(it is a combination of his girls' names). His aircraft was seven years in the making. The aircraft now has more than
500 hours on it.
Above, Gary and Shad Bell's Pietenpol, flown in from Ohio. This aircraft has made numerous trips to Brodhead.
Randy and Shad's Air Campers joined Tom Brown's Piet and Bill Knight's Last Original at Brodhead this year.
Some years at Brodhead draw more than 25 Pietenpols. 2013 was a light turnout, but Corvairs powered one-third of the
Brodhead is a very peaceful setting, the antithesis of Oshkosh. Grace photographed these two Piets flying in formation
Two other Corvair powered airplanes flew at Brodhead 2013. Pat Hoyt of Minnesota flew in their 601XL while his lovely wife
Mary drove their support vehicle. Dan Weseman flew the Panther prototype at Brodhead.
I am on the Saturday Speakers List at each Brodhead. It is an excellent setting in which to speak plainly about true
homebuilding. I cover a broad variety of topics that address motivation and information for grassroots builders.
I can share things with the builders at Brodhead because they are nearly 100% traditional builders. Some of the
observations and commentary would be misunderstood or misinterpreted by a general aviation audience at Oshkosh.
Above, I receive a Participation Award from emcee P.F. Beck, right. P.F. has been the local host at three
Corvair Colleges in
Barnwell, S.C., and will do the same again for
CC #27 in November.
After the Forum, we conducted a Tailgate Tech Seminar. Piet builder Mark Chouinard, extreme right, extreme tall,
listens as I answer questions. Mark picked up one of our high thrust line Piet Mounts for his project.
Jim Boyer of California picked up another one for his Piet. That rounds out the first 10 of these new generation Mounts.
While I have previously made Motor Mounts according to the original drawing, all of our Piet mounts from here forward
will be high thrust line models.
Waiex/3,000cc Corvair builder Greg Crouchley, above, demonstrates that you can put a Corvair into a Porsche.
He drove out from Rhode Island with one in his front trunk. He is now starting another Corvair
engine for his second aircraft project.
Above, Grace and aviator extraordinaire John Schmidt of Minnesota take Greg's Porsche out for a spin around Brodhead.
Greg was a pretty good sport and merely asked that they try to keep it under 200KM/hour.
It is about a hundred mile drive from Brodhead to Oshkosh. We met up with Brother Roy at Brodhead and ren d'evoused with
Mark Petniunas from FalconMachine.net on route. Grace took this photo at a fuel stop. Although we work together and coordinate
efforts for the benefit of builders, this was the first time the five of us had been in the same place since
The last section of the drive to Oshkosh is up Wisconsin Route 26, which is also one of the landmark NOTAm approach paths
to the airshow. Grace captured Randy Bush's Miss Le'Bec and two other Piets from Brodhead flying to OSH at 300 AGL.
Here's a close up of Randy Bush flying lead on the approach into OSH.
Airventure Oshkosh 2013
I've been going to Oshkosh since 1990. I have only missed one year out of the past 18. While many people attend for a day
or two, being a commercial presenter requires arriving the day before and staying till the last hour. Combine this with
the fact that I worked as a staff writer with EAA Publications for many years and I'm in a good position to comment on how
things have changed at OSH in the past few decades.
However, in the following photos we'll concentrate on the things that do not change year after year. First and foremost
will always be spending time with friends, old and new, for one week of the year. These photos and words will give you a
glimpse into how we see Oshkosh, a veteran insider's view rather than a typical Web site's commercial angle. We hope it
broadens your perspective.
After Brodhead, Patrick Hoyt of Minnesota flew his 601 XL up to display it all week at AirVenture. The aircraft
looks like a 650 because of the canopy, but it is technically a 601 XL. It was Patrick's first trip in the aircraft to
Oshkosh. At the end of the week, he said the experience of flying in the plane and engine you built yourself was
We arrived to unpack on Sunday, the day before the show. It was Scoob E's second trip to Oshkosh. He will
gladly go anywhere to stay with you.
Setting up takes a few hours. Primary concern is securing against wind damage. Over the years, we have had three
tents destroyed by windstorms. Vern, at right above, came up from Florida this year for his first Oshkosh. In the background,
one of my favorite aircraft, a Stinson Trimotor.
One of the most frequent questions people have before Oshkosh is if they can buy some part from us while they are there.
The answer is, and will always be, yes. We carefully pack thousands of pounds of parts
into the enclosed trailer above to bring
to the show to sell. (Dog is just sitting in trailer, he doesn’t get packed in there.) This year included delivering two complete engines. A week's rental of a thousand square feet of grass
from the EAA sets you back almost $3,000. That and traveling expenses are a lot of overhead. Fortunately, we do a
brisk business with builders who take home FlyCorvair parts large and small.
After several decades of going to Oshkosh, you're rewarded with having old friends everywhere on site.
Above, Grace with long time EAA Homebuilders Welcome Center Volunteer Paul Hummel.
We shared our booth with Roy Szarafinski of Roy's Garage and Mark Petniunas of Falcon Machine. Above, Roy next to
the stylish hood ornament on his PT Cruiser tow vehicle.
Above is a 2,850 cc/110 hp engine we delivered the first day of the show to Canadian Zenith 750 builder Greg Ross.
Above, Greg and his Dad with their new engine in the back of their truck.
They also picked up a set of installation components, including a powdercoated
When setting up the tent, a lot of things like hanging up display Motor Mounts
in the top of tent went quick with the help of 6'5" Pietenpol builder Mark Chouinard. I am 6'0", and after looking at the photo,
I am convinced that Mark is being a little modest or he needs a new tape measure.
The weather was unusually and delightfully cool. Above, Scoob E shares a blanket with Randy Bush's girlfriend Brenda,
a big fan of little dogs.
Oshkosh is the place where many of the East and West Coast flyers of Corvair powered airplanes meet each other for the
first time. In our booth, on the extreme left, Corvair powered Dragonfly pilot Charlie Johnson and his brother Bob of Utah.
On the right side, 500 hour Corvair powered Pietenpol pilot Randy Bush of Tennessee, with Roy to his left.
Even by the end of the first day, a lot of familiar faces show up. I like the fact that our booth is thought of as a
central gathering point for fans of Corvair power and traditional homebuilders alike. Many booths are deserted by 1 minute
after 5 p.m., the required staffing hours. Most evenings at Oshkosh, our booth hosts an informal gathering of aviators late
into the night.
I consider this man, Tim Hanson, above left with me, one of the most impressive aviators I've ever met. If you man a commercial display at
Oshkosh, at least 100 people a day will tell you that aviation is the most important thing in their life beyond family, and
that they are willing to exert great effort to taste its rewards. In reality, many of these people are easily distracted from
putting in the real effort that it takes to make your mark in aviation. Enter Tim Hanson. When he was a very young college
student, he actually took a Greyhound bus from Ohio to Corvair College #9 in Florida. One or two people
present stupidly questioned the potential of a typically broke college student dreaming of becoming an aviator. I understood
that the reality was the polar opposite truth: 48 hours of bus travel as a hurdle to attending a College
would screen out 95% of those allegedly devoted to aviation, but not Tim. I knew that it might take time, but there is no
substitute for persistence and dedication. Today Tim is a college graduate, a licensed pilot, and a homebuilder. Anyone who
would not be moved by his story must have long forgotten what it's like to be young, with the ambition of youth.
During the main hours of the show, the tent is usually filled with people who have come to learn. Our displays include a
tremendous amount of factual literature, individual parts and instructional aids.
Above, USMC/ATP/Pietenpol builder Terry Hand reading information on the main display. We have consistently attracted
many aviation professionals like Terry to the Corvair movement. They are an important asset in our program, where we aim
not just to teach people about engines, but expand everything they know about homebuilding and aviation.
Terry recently headed up the effort to support the project of Spencer Rice, 15, of Portland, OR, our youngest builder.
Above, the man in the middle exemplifies the spirit of the Corvair movement. Mike Quinn of North Carolina is a skilled
mechanic. He has attended a number of Corvair Colleges and holds the distinction of being the last man working on the
last engine running during the last hour of the College. What makes this truly unique? None of the engines he was wrenching
on were his. He came to the Colleges and shared in the creation of other people's engines, and gave assistance to people new
to engine building. You can attend as many other aviation technical seminars as you like, but you will not find an old
school homebuilder like Mike Quinn repeatedly attending them for the benefit of others. This is what sets
East meets West in the tent. Two of the sharpest minds in the Corvair movement belong to Ken Pavlou of Connecticut, at
left above, and David Josephson of California on the right. Both are Zenith builders. Ken has been involved in numerous projects
in support of the Corvair movement. David is a nationally known expert on acoustics, and is interested in extreme noise
reduction in aircraft. Both of these men find the Corvair movement the right focal point for their efforts in aviation.
If you review our Corvair College #14 notes you will see a new builder just getting started named
Louis Leung. Above, he is exiting his Corvair powered 601 XL at Oshkosh. Besides a demanding career and a full family life,
he built his first airplane and engine in 48 months. This is a triumph of learning just when many people elsewhere try to find out
how little they can learn rather than how much.
Not everything discussed in the booth focuses on Corvairs. Corvair powered Dragonfly pilot Charlie Johnson of Utah
holds up a photograph of himself in the pilot seat of a 70-year-old aircraft, a Boeing B-17 Flying Fortress that Charlie got
to fly for 30 minutes.
The row of Corvair powered airplanes right behind our tent attracted a lot of attention and was very useful in explaining
installations. If you have ever wondered how widespread the Corvair movement is, two of the gentlemen pictured above have
running Corvair engines on their planes back at home in Australia.
Two American aviators with international backgrounds meet again in the Corvair powered parking row. Pramod Kotwal, at left
above, was our local host for Corvair College #14 in Lowell, Mass., where Louis Leung, right, got his
start. Pramod's family is from India, and Louis' family is from Hong Kong. Today they both call New England home, and both flew
in to Oshkosh.
On Wednesday night, we jointly sponsored a Corvair cookout with Dan and Rachel Weseman. Although there was a ferocious
afternoon windstorm, it was calm and peaceful the last hours of daylight and we had a great time with 70 people, most of
whom stayed through the night air show.
One of the unusual experiences of Oshkosh is running into people from your local airports. On the left, Florida pilot Buzz
Glade brought two USAF aviators to the Corvair cookout. It was the first time these men got a good look at grassroots
homebuilding and they were impressed, which is no mean feat when you consider that these guys fly F-22 Raptors as a day job.
If you would like another example of the diversity of the people in the Corvair movement, we present the centerpiece of the
night air shows, the Shockwave, a 300 mph, full size semi-truck powered by a jet engine. Les Shockley, its creator, is a
homebuilder. His engine of choice? The Corvair. We've had him for a visit at our place and enjoyed an afternoon of exchanging
ideas. Les is an old school drag racer from the Don Garlits' era, when racers built and drove their own cars, something
virtually unknown in motor sports today.
Above is a typical view of our booth in action.
At left with me above is Kitfox CEO and owner John McBean. He stopped by the booth so we could discuss plans
for future factory supported Corvair options. We have known him for a number of years and he is a long-term planner. The Corvair
has flown on the Kitfox and is a good engine choice for Models V and up. We are both eagerly anticipating the arrival of
John Pitkin's Corvair powered Kitfox 7. We'll keep you posted on developments.
In the world of airframe manufacturers, the Heintz family, developers of the Zenith line of aircraft kits, have been our biggest
supporters. Over the past 10 years we have done numerous joint presentations. The payoff is there are now more than 80 Corvair
powered Zeniths flying. Above at left, Sebastien Heintz, president of Zenith Aircraft, with Scoob E and I in our booth. We are
holding Corvair College #26 at the Zenith Factory in Mexico, Mo., Sept. 18-20.
Click on this CC #26 link
to find out more.
Thursday night is the traditional Zenith Builders Dinner which draws several hundred people. I was the kickoff guest speaker.
The focal point of my message was all the good times we have had with builders and the Heintz family in the 10 years since we flew the
first Corvair on our own 601 XL.
On the left above is one of the most respected men in the EAA, Bob Barrows, designer of the Bearhawk series of aircraft. Bob holds
the distinction of flying an experimental aircraft into every single Oshkosh, all 44 of them. This year he flew in his new
Bearhawk LSA design. Under development for several years, this is a very impressive plane. The prototype is powered by a specially
built Continental engineered by Bob. In experimental LSA aviation, typically new designs are introduced with the Rotax 912 engine.
This predictable move is driven by the fact that Rotax will make any new airframe designer an OEM deal and pay them a substantial
kickback, thousands of dollars, for every engine sold to their builders. This makes designers money, but does nothing to support
affordable aviation. Bob is the antithesis of such greed-driven mentality. He is only interested in engines that reflect his
allegiance to simplicity and practical values. So far this has meant Lycomings and Continentals on his designs. At Oshkosh, we made plans
to jointly work on a Corvair powered installation kit for his builders. In conversation, it was revealed that Bob and I have one other
thing in common: Neither one of us has ever flown in a Rotax 912 powered airplane. They just don't represent anything that a traditional
homebuilder would find to be a reasonable value. Bob invited Grace, center, to test out the new Bearhawk LSA but she declined because
once you go Bearhawk, it's hard to go back.
Making its Oshkosh debut as a proven aircraft, the SPA Panther, above. The fact that the Wesemans purposefully selected the
Corvair as the best engine with which to introduce their design opened a lot of people's eyes about the wide ranging capability of the
Corvair. Look for an extraordinary amount of press coverage on this aircraft in the coming months.
Something every commercial vendor knows: The last day of any weeklong airshow will be very slow and referred to those left at the
show as Vendor Bonding Day, when you go and visit all your friends who have aviation businesses. The above photo is our empty booth
on Sunday morning.
Late Sunday brings visits from a variety of friends. On the left is the Zenith dealer for South Africa, Philip. In the middle is
Robert Helms, president of UL Power Engines, and at right is Mark Petniunas of Falcon Machine. Here is something few homebuilders are
aware of: Most alternative engine providers who've been at it for five or more years are actually reasonably good friends with each
other. While we all highlight why we find the engine we promote to be a great option, none of the successful alternative engine
providers is a zealot who think 100% of builders need his product. That type of thinking is for zealots who don't see that builders
are all diverse individuals with unique goals. Zealots often make a big splash, and fool a number of magazine people, but rarely stay
around to serve builders for the long term. I always find it funny when Internet drama club people try to paint different engine
people as serious adversaries, when we are far more likely to be goofing around with them after hours at Oshkosh.
Above, four old friends, people who have done great work in supporting homebuilders. From the left, journalist Cory Emberson,
Kitplanes senior writer and 601/Corvair builder Rick Lindstrom, Grace and the EAA's hardest working man, Charlie Becker.
I took this photo as we were packing up.
Above, Mark and I packing late Sunday afternoon. Many business people try to pack up early on the last day, eager to leave. I am
just the opposite. I don't enjoy myself when I am in a rush, and I try to avoid people who try to make every hour and task in life
akin to some type of countdown in a "reality" TV show. Many of the best hours I have had at shows were on the last day in a relaxed
mood. Driven direct, it is 1,350 miles home. Not much is to be gained by rushing to leave two hours earlier. Much better to savor a
few hours with friends at the end of another year and roll out smoothly a little later.
I detest people who are litter bugs, and I work to leave every place at least as good as I found it. It is a general theme that
goes with filling up the tank in borrowed vehicles, and offering to do the dishes when people have you over for dinner. At airshows,
most people are pretty good about cleaning up. When tossing out our trash in the big dumpster, I came across evidence of something
few people clearly understand. Under the beer bottle is several hundred, super expensive, 10 page Rotax 912 brochures. We have a lot
of stuff printed, and I am in a good position to say that they would cost $2 - $3 each, even in massive quantity. Why does a Rotax 912
cost more than $20,000? Do you think the money is going to engineering or marketing? The dumpster holds your answer. A giant chunk of
the cost goes to a flood of marketing. Before the show, Rotax provides stacks of high quality brochures to every airframe dealer, and
sets them all up to make a $2,000+ kickback on each sale. At the end of the show the dealers often just dump the excess brochures,
knowing that the high price of the engines and their payoff system will provide plenty more at the next show. I use the terms kickback
and payoff intentionally. If a buyer is dealing with a knowledgeable salesman and understands that the man is compensated, that is
correctly called a commission. When the man's payment is held secret from the buyer, and he provides little or no product support, that
is a kickback.
Getting ready to go, Mark, Grace, Scoob E, myself and Roy stand in front of Mark's 1963 Corvair van, The Groovy Cruiser.
Notice how empty the main field is just 3 hours after the show. After Oshkosh a few years ago, Mark and I took
The Groovy Cruiser on a long odyssey to Cherry Grove, Bernard Pietenpol's home town in Minnesota.
The van looks very rough at first glance. Mark has owned it for almost 20 years, and he is conducting a long term experiment on
maintenance, namely, can you drive a 50-year-old vehicle 10,000 miles a year while only giving it 5 hours a year in total maintenance
with a budget of $200? Answer: You can if you are skilled and the vehicle in question is a Corvair. The test does not allow time or
money for appearance. Yet, it is a rolling work of very detailed art. Notice the flag, NASA and EAA stickers, and the Tiki masks.
Above, last words at the booth space. What makes Oshkosh different? If you look closely, there is a B-29 Superfortress parked on the
far side of the runway. If you love planes, you will still find things there arresting after many visits. The critical thing is to
remember that you don't live at Oshkosh, you spend the other 51 weeks of the year at your home airport, and your goal is to learn,
build and fly, not be a spectator in aviation. Oshkosh is organized as a spectator event, and it is good to take it in, but don't
adopt is as a philosophy the other 51 weeks.
Last stop on the way off the grounds is the Arch, a place were people leave messages in the plaques in the ground. This is part of
why I like to let people leave, so it is quiet on the way out. I didn't know David, but I do know his father, Corvair/Kitfox builder
Dave Glassmeyer. I have been present on several occasions at Colleges when Dave has spoken of his great love for his son, and the
struggle to come to terms with the loss. I have great admiration for Dave for this; it takes courage to remember and speak of these
things. While much of aviation is diluted down to a politically correct, vanilla ice cream, character free, inoffensive, Disney
experience, we have worked to keep Corvair Colleges and other things we do as real experiences, where people can be themselves and
be among like minded, thoughtful, creative people of all kinds, a setting where it is very welcome for a man to speak of how much he
loves his son.
Above, a tribute to Sue Knight, late wife of Bill Knight, the aviator who cares for Bernard Pietenpol's Last Original
Corvair powered Aircamper. Grace and I are two of the many people who knew and admired her. Bill is known as a very hard-working
and energetic guy, but he will gladly tell anyone that Sue was the origin of every good thing that ever happened in his life. They
lived in Brodhead, and we never go there without thinking about how the gathering there is great, but diminished without her.
Above, Grace and Scoob E stand in front of the Arch, as we depart from my 20th Oshkosh. I hope the pictures and words gave you a
slightly refined picture of the event, a chance to see it from a different perspective. If you have never been, you should go a
least once, and when you do we will be glad to have you hang out with us and enjoy the experience from a builder's perspective.
"Real freedom is the sustained act of being an individual." WW - 2009
Oshkosh 2010 With FlyCorvair.com
Oshkosh 2009 With FlyCorvair.com
Oshkosh 2008 With FlyCorvair.com
Oshkosh 2007 With FlyCorvair.com
Oshkosh 2006 With FlyCorvair.com
Oshkosh 2005 With FlyCorvair.com
Oshkosh 2004 With FlyCorvair.com
Oshkosh 2003 With FlyCorvair.com
Oshkosh 2000 With FlyCorvair.com